Focusrite Saffire Pro 40 – 20 Input / 20 Output FireWire Audio Interface
Focusrite Saffire Pro 40 – 20 Input / 20 Output FireWire Audio Interface. The Focusrite Saffire PRO 40 digital recording interface offers you multilayer recording capabilities. In the process, this device gives you the ability to capture a clean and transparent sound with very little noise or distortion. Additionally, it helps you effectively produce audio sound using any compatible Macintosh or Windows audio workstation. Moreover, you can set eight different mic preamp levels for quality sound even at high gain. Two of the mic, line, or instrument inputs are installed on the front panel of the Saffire PRO 40, which also includes two independent headphone monitor outputs. This ADAT system provides you with a total of 20 inputs and 20 outputs and a unique loopback function. The microphone dynamic range is about 109dB, and the line level outputs are about 108dB.
Features
- 8 high-quality award-winning Focusrite preamps
- High-quality 24-bit/96kHz FireWire interface
- 20 inputs and 20 outputs
- Suite of Focusrite VST/AU plug-ins
- 2 separate headphone buses
- Saffire Pro 40 control zero-latency DSP mixer/router
- Mac and Windows compatible
- 2 Mic/Line/Inst Combo XLR (Inputs 1 and 2)
- 6 Mic/Line Combo XLR (Inputs 3-8)
- Automatic switching between inputs
- Stereo S/PDIF I/O on RCA
- 8 ADAT I/O Optical Connector, reduces to 4 I/O at 88.2/96kHz
- 8 TRS jack (outputs 3-10)
- 2 monitor mix outputs on TRS jack (outputs 1 and 2)
- Stereo S/PDIF output on RCA
- 2 x 6-pin FireWire sockets
- MIDI I/O
Specifications
Converters | 24-bit |
Sample Rates | 44.1, 48, 88.2, and 96kHz |
Analog Input | 8 x XLR / 1/4″ TRS Combo Microphone/Line |
Analog Output | 10 x 1/4″ TRS 2 x 1/4″ TRS Headphone |
Digital Input | 1 x TOSLink ADAT Lightpipe 1 x RCA coaxial S/PDIF |
Digital Output | 1 x TOSLink ADAT Lightpipe 1 x RCA coaxial S/PDIF |
MIDI In/Out | 2 x 5-pin DIN I/O |
Sync In/Out | S/PDIF |
Headphone Output | 2 separate busses |
THD + N | Microphone/Line: 0.001% (@ 1 kHz with 20 Hz to 22 kHz band-pass filter) Instrument: 0.004% (0 dBu input and 20 Hz to 22 kHz band-pass filter) |
Dynamic Range | 110 dB, A-weighted |
Frequency Response | 20 Hz to 20 kHz, +/-0.1 dB |
Power Requirements | 90~250 VAC, 50/60 Hz |
System Requirements | Mac: PowerPC G4/Dual 1 GHZ or faster or any Intel-based Mac OSX 10.4 and 10.5 512 MB (more recommended)Windows: 900 MHz AMD or Pentium. (1.5 GHz or higher recommended) Windows XP SP2 (32-bit and 64-bit) and Vista (32-bit and 64-bit) 512 MB (more recommended) |
Specialties | First 2 input channels feature -9 dB pads for additional headroom |
See more soundcards
We do not sell any replica products. We believe in quality. Not in quantity.
Call for any enquiry: +8801798740472; +8801302555180.
Reviews
There are no reviews yet.