fbpx

Shop Beyond Limits!

Lexicon I-O 22 USB Audio Interface

৳ 26,000

  • USB 2.0 Desktop Recording Studio
  • 1kHz to 96kHz sample rates, 24-bit resolution
  • Pantheon II VST/AU reverb plug-in with 6 legendary Lexicon reverbs
  • dbx® 60V high-voltage, ultra-low noise microphone preamps
  • Superior sonic performance
  • 2 analog combi-jacks for mic/line inputs
  • 2 analog 1/4″ TRS balanced outputs
  • Zero latency monitoring

Out of stock

Flash-Sale-Diamu

Lexicon I-O 22 USB Audio Interface

Lexicon I-O 22 USB Audio Interface. No artist likes to be told what to do – what tools to use and what tools you can’t use. Lexicon understands your passion and it inspires us to innovate. Brilliantly designed, the I·O Desktop Recording Series is compatible with any DAW, including Pro Tools 10 through 12. Now this innovative hardware design meets the software capability of any creative passion.

Featuring newly designed dbx 60V high-voltage, ultra-low noise mic preamps on both channels, the I-O|22 is more than equipped to provide professional recordings that keep your music sounding its best. The preamps run on a high-voltage supply to guarantee stability and provide you with a superior recording across a wide dynamic range. Performance driven A/D – D/A converters ensure pristine 24-bit/96kHz audio to capture every subtle detail of your performance.

The I-O|22 can record two tracks at once and includes 2 combi-jack mic/line inputs with +48V phantom power, 2 TRS balanced line outputs, a hi-Z instrument input, a 1/4″ high power headphone output, and MIDI I/O. Dedicated knobs and meters offer easy access to input and output levels and locking combi-jacks make sure that a connection is not lost in the middle of a performance.

Features

  • USB 2.0 Desktop Recording Studio
  • 1kHz to 96kHz sample rates, 24-bit resolution
  • Pantheon II VST/AU reverb plug-in with 6 legendary Lexicon reverbs
  • dbx® 60V high-voltage, ultra-low noise microphone preamps
  • Superior sonic performance
  • 2 analog combi-jacks for mic/line inputs
  • 2 analog 1/4″ TRS balanced outputs
  • Zero latency monitoring
  • Low latency ASIO drivers
  • Streamlined monitor form factor puts all recording controls at your fingertips
  • Separate level meters and gain control per channel
  • 1 side panel 1/4″ instrument input
  • 1 side panel headphone output with dedicated volume adjustment
  • MIDI in and out

Specifications

  • Microphone Inputs: Female XLR Pin 2 Hot
  • Input Impedance: 3k ohms balanced
  • Phantom Power: +48 Volts
  • Maximum gain: +58 dB
  • I.N. (at max gain): -125 dBu @ 58dB gain typical (150 ohms source) -129 dBu @ 58dB gain typical A-weighted (150 ohms source)
  • Maximum Input Level: +21 dBu at minimum gain
  • Frequency Response: +0/-1 dB, 20Hz – 20kHz
  • THD+N:
  • <0.006%, 20Hz – 20kHz (mic input to main output) 0 dBu input level, Input knobs at 11 o’clock
  • <0.003%, 1kHz, +5 dBu input level, Input knobs at minimum, Output knob at max
  • Line Inputs: 1/4″ TRS balanced or unbalanced
  • Input Impedance: 20k ohms balanced, 13k ohms unbalanced
  • Maximum Input Level: +32 dBu
  • Frequency Response: +0/-1.5 dB, 20Hz – 20kHz (reference 1kHz)
  • THD+N: <0.004%, 20Hz – 20kHz (line input to main output) 0 dBu input level, Input knob at 12 o’clock, Output knob at max
  • Instrument Input: 1/4″ TS unbalanced
  • Input Impedance: 1M ohms
  • Maximum Input Level: +13 dBu
  • Frequency Response: +0/-2 dB, 20Hz – 20kHz (instrument input to main output)
  • THD+N: <0.004%, 20Hz – 20kHz, 0 dBu input level, Input knob at 10 o’clock, Output knob at max
  • Line Outputs: 1/4″ TRS balanced or unbalanced
  • Level: >+18 dBu maximum
  • Impedance: 32 ohms Balanced, 16 ohms Unbalanced
  • Headphone Output: 1/4″ stereo jack 350mW per channel at 50 ohms
  • MIDI Interface: 5 pin DIN connectors for MIDI in and MIDI out (5 volt signal)
  • Sample Rate: 44.1, 48, 88.2, or 96 kHz (determined by computer application)
  • Dynamic Range:
  • A/D (24 Bit) 108 dB typical, A-weighted, 20Hz – 20kHz
  • (44.1 kHz sample rate)
  • D/A (24 Bit) 110 dB typical, A-weighted, 20Hz – 20kHz
  • A/D/A (24 Bit) 102 dB typical, A-weighted, 20Hz – 20kHz
  • Power Requirements: 12W 9VAC
  • US and Canada: 120 VAC, 60 Hz Adapter: PS0913B – 120
  • Japan: 100 VAC, 50/60 Hz Adapter: PS0913B – 100
  • Europe: 230 VAC, 50 Hz Adapter: PS0913B – 230
  • UK: 240 VAC, 50 Hz Adapter: PS0913B – 240
  • Australia: 240 VAC, 50 Hz Adapter: PS0913B – 240-AU

See more soundcards

We do not sell any replica products. We believe in quality. Not in quantity.

Call for any enquiry: +8801798740472; +8801752771463

Reviews

There are no reviews yet.

Be the first to review “Lexicon I-O 22 USB Audio Interface”

Lexicon-I-O-22-USB-Audio-Interface
Lexicon I-O 22 USB Audio Interface

Out of stock

Diamu.com.bd uses cookies to offer you a better browsing experience. By browsing our website, you agree to our use of cookies.